Journal Publications

International Journals

 

  1. Deepak Rajendra Unune, Chandrakant Kumar Nirala, Harlal Singh Mali,(2019) “Accuracy and quality of micro-holes in vibration assisted micro-electro-discharge drilling of Inconel 718”, International journal of Measurement, ISSN: 0263-2241, IF:2.218, 135, pp. 424-437 (SCI)
  2. Bhargav Prajwal, Harlal S Mali, Ravindra Nagar (2019) Life Cycle Energy Assessment of a Typical Marble Processing Plant, International Journal of Social Ecology and Sustainable Development (IJSESD), ISSN: 1947-8402, Vol.10(1), pp. 31-45 (SCOPUS)
  3. Baghel, Rupali; Mali, Harlal Singh; Biswas, SK; 2018, ” Optimization and Surface Analysis of Diamond Grinding Assisted EDM of TiN-Al2O3 Ceramic-Composite “, The International Journal of Advanced Manufacturing Technology, ISSN: 1433-3015, IF=2.209(SCI),  DOI: 10.1007/s00170-018-1842-z
  4. DR, Unune; CK, Nirala; HS, Mali; 2018, “ANN-NSGA-II dual approach for modeling and optimization in abrasive mixed electro discharge diamond grinding of Monel K-500” Engineering Science and Technology, an International Journal(JESTECH), ISSN: 2215-0986, IF= 0.38 (SCI), DOI: https://doi.org/10.1016/j.jestch.2018.04.014
  5. R Baghel, HS Mali, SK Biswas, 2018, “Parametric optimization and surface analysis of diamond grinding-assisted EDM of TiN-Al2O3 ceramic composite” The International Journal of Advanced Manufacturing Technology, ISSN: 1433-3015, IF=2.209(SCI), DOI: https://doi.org/10.1007/s00170-018-1842-z
  6. RH Teater, KM Fischenich, BB Wheatley, L Abrams, SA Sorby, HS Mali, Anil Jain and Tammy L Haut Donahue; 2018, “Assessment of the compressive and tensile mechanical properties of materials used in the Jaipur Foot prosthesis” Prosthetics and orthotics international, ISSN: 0309-3646 (print); 1746-1553 (web) IF=1.185 (SCI), DOI: 10.1177/0309364618767143
  7. DR Unune, HS Mali, 2018, “Experimental investigation on low-frequency vibration-assisted µ-ED milling of Inconel 718” Materials and Manufacturing Processes 33 (9), ISSN: 1042-6914 , IF=2.274, DOI: https://doi.org/10.1080/10426914.2017.1388516
  8. Deepak Rajendra Unune, Mohsen Marani Barzani, Suhas S Mohite, Harlal Singh Mali, 2018, “Fuzzy logic-based model for predicting material removal rate and average surface roughness of machined Nimonic 80A using abrasive-mixed electro-discharge diamond surface grinding” , Neural Computing and Applications, Volume 29 (9), ISSN: 0941-0643 (Print) 1433-3058 (Online), IF=2.505, DOI: https://doi.org/10.1007/s00521-016-2581-4.
  9. Harlal S. Mali, Bhargav Prajwal, Divyanshu Gupta, Jai Kishan, 2018, “Abrasive flow finishing of FDM printed parts using a sustainable media”, Rapid Prototyping Journal, Vol. 24 Issue: 3, ISSN: 1355-2546, IF:1.94 , DOI: https://doi.org/10.1108/RPJ-10-2017-0199
  10. Unune, Deepak Rajendra; Mali, Harlal Singh; 2017, ” Experimental investigation on low-frequency vibration assisted μ-ED milling of Inconel 718″, The International Journal of Materials and Manufacturing Processes,  ISSN: 1042-6914, DOI: 10.1080/10426914.2017.1388516, (SCI).
  11. Priyanka P., Dixit A., Mali H. S.,  2017, “High-Strength Hybrid Textile Composites with Carbon, Kevlar, and E-Glass Fibers for Impact-Resistant Structures. A Review.” International Journal Mechanics of Composite Materials, ISSN 1573-8922, Vol. 53, No. 5, pp.-685-704,(SCI).   
  12. Anoj Meena, Harlal Singh Mali,  Amar Patnaik and Shiv Ranjan Kumar, 2017, “Comparative investigation of physical, mechanical and thermo-mechanical characterization of dentalcomposite filled with nanohydroxyapatite and mineral trioxide aggregate” International Journal of e-Polymers,  DOI 10.1515/epoly-2016-0319, ISSN: 1618-7229,  IF: 0.812 (SCI).
  13. Sambharia J., Mali, Harlal Singh & Garg, Vishal; 2017 “Experimental Investigation into Unidirectional Abrasive Flow Machining of Trim Die”, Materials and Manufacturing Processes, Tailor & Francis, ISSN: 1532-2475,  IF= 2.274 (SCI), DOI: 10.1080/10426914.2017.1364847,  
  14. Unune, Deepak Rajendra; Mali, Harlal Singh; 2017, “Parametric Modelling and Optimization for Abrasive Mixed Surface Electro Discharge Diamond Grinding of Inconel 718 using Response Surface Methodology”, The International Journal of Advanced Manufacturing Technology, ISSN: 1433-3015, IF=2.209(SCI), Volume 93, Issue 9–12, pp 3859–3872.
  15. Sambharia J., Mali, H.S.; 2017, “Recent Developments in Abrasive Flow Finishing Process-A Review of Current Research and Future Prospects”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE., IF= 1.366 (SCI) eISSN: 20412975, ISSN: 0954-4054, DOI: 10.1177/0954405417731466.
  16. Ian Huber; Fischenich, Kristine M.; Jacob Worynski; Brent Niese; Rachel Teater; Abrams, Lisa M.; Sorby, Sheryl A.; Mali, Harlal Singh; Jain, Anil K; Donahue; Tammy L. Haut; 2017, “Epidemiological Study of Failures of the Jaipur Foot”, International Journal of Disability and Rehabilitation: Assistive Technology (IIDT), eISSN: 1748-3115, ISSN: 1748-3107, IF-1.06  (Scopus),   DOI: 10.1080/17483107.2017.1369593.
  17. Wheatley, Benjamin B.; Fischenich, Kristine M.; Abrams, Lisa M.; Sorby, Sheryl A.; Mali, Harlal Singh; Jain, Anil K; Donahue, Tammy L. Haut; 2017, “An International Fellowship Experience for Engineering Undergraduates: Improving Technical, Teamwork, and Cultural Competency” International Journal of Engineering Education (IJEE) , ISSN: 0949-149X,  IF= 0.77, Vol. 33, Issue No. 4, pp. 1189–1198(Scopus).
  18. Prajwal, B.;  Mali, H.S. ; Nagar, R.;  2017 “Influence of the physico-mechanical and mineral properties of various marble on diamond tool wear”, International Journal of Materials Engineering Innovation. ISSN: 17572754, Vol. 8, No. 2, pp.122-145 (Scopus)
  19. Mali, Harlal Singh; Baghel, Rupali; Unune, Deepak Rajendra; 2017 “Experimental Investigation on Hybrid Micro-Electro Discharge Machining of Inconal 718 and Ceramics Materials” International Journal of Conceptions on Mechanical and Civil Engineering, ISSN: 2357 – 2760, Vol. 5, Issue. 1, pp.-1-6(Non-SCI/Scopus).
  20. Sambharia, Jaikishan; Mali, Harlal Singh; 2017 “Characterization and Optimization of Rheological Parameters of Developed Alternative Polymer Abrasive Gels for Abrasive Flow Machine”, Journal of Materials Science and Surface Engineering,Vol.5(3) ), pp 549-555, ISSN:1755-2060, (Non-SCI/Scopus)
  21. Pathri, Bhargav Prajwal; Mali, Harlal Singh; Nagar, Ravindra; 2016, “Prediction and calculation of specific cutting energy while performing milling operation on natural stone” WULFENIA Journal, ISSN:1561-882X, Vol.23, Issue-12, IF= 2.0, (SCI)
  22. DR Unune, MM Barzani, SS Mohite, HS Mali, 2016, “Fuzzy logic-based model for predicting material removal rate and average surface roughness of machined Nimonic 80A using abrasive-mixed electro-discharge diamond surface grinding”, Neural Computing and Applications,Springer London,1-16, IF=1.763, ISSN: 0941-0643, (Scopus)
  23. Anoj Meena, Harlal Singh Mali,  Amar Patnaik and Shiv Ranjan Kumar, 2016, “Effect of adding nanoalumina and marble dust powder on the physical, mechanical, and thermo-mechanical characterization of dental composite” Polymer Composites,  DOI:  10.1002/pc.24131, ISSN: 1548-0569, IF: 2.004 (Scopus)
  24. DR Unune, HS Mali, 2016 “A study of multiobjective parametric optimisation of electric discharge diamond cut-off grinding of Inconel 718”, International Journal of Abrasive Technology, 7 (3), 187-199, IF=0.47, ISSN: 1752-2641, (Scopus)
  25. Unune, Deepak Rajendra; Mali, Harlal Singh; 2016, “Experimental investigation on low-frequency vibration assisted micro-WEDM of Inconel 718” Engineering Science and Technology, an International Journal (JESTECH) , ISSN: 2215-0986, doi:10.1016/j.jestch.2016.06.010, IF=0.654 (Scopus).
  26. Pathri, Bhargav Prajwal; Garg, Arpit Kumar; Unune, Deepak Rajendra; Mali, Harlal Singh; Dhami, Sukhdeep S.; Nagar, Ravindra; 2016, “Design and Fabrication of a Strain Gauge Type 3-axis Milling Tool Dynamometer:: Fabrication and Testing” International Journal of Materials Forming and Machining Processes (IJMFMP), ISSN: 2334-4563, vol.3, Issue-2, pp.1-15, IF=1.241. (Non SCI/Scopus)
  27. Anurag Dixit, Harlal Singh Mali and R. K. Misra, 2015,“Investigation on the Thermo Mechanical Behavior of 2×2 Twill Woven Fabric Advanced Textile Composite”, Mechanics of Composite Materials ISSN:0191-5665, Vol. 51, Issue-2, pp:253-264. (SCI)
  28. A, Dixit; R K, Misra; H S, Mali, 2015,”Finite element analysis of quasi-static indentation of   woven fabric textile composites using different nose shape indenters”,Materials Science & Engineering Technology (Materialwissenschaft und Werkstofftechnik),   ISSN: 1521-4052, Vol. 46, Issue-10, pp: 1014–1028. (SCI)
  29. Deepak  Rajendra Unane, Vijay Pratap Singh, Harlal Singh Mali,  2015,”Experimental Investigations of Abrasive Mixed Electro Discharge Diamond Grinding of Nimonic 80A” International Journal of Materials and Manufacturing Processes, eISSN: 1532-2475, ISSN: 1042-6914 doi:10.1080/10426914.2015.1090598, (SCI)
  30. Deepak Rajendra Unune, Harlal Singh Mali, 2015, “Artificial neural network–based and response surface methodology–based predictive models for material removal rate and surface roughness during electro-discharge diamond grinding of Inconel 718” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, eISSN: 20412975, ISSN: 0954-4054 , doi:10.1177/0954405415619347. (SCI)
  31. Sambharia, J; Mali, HS, 2015, “Characterization and Performance Evaluation of Developed Alternative Polymer Abrasive Gels for Abrasive Flow Finishing Process” International Journal of  Precision Technology,  ISSN: 1755-2079, Vol. 5, Nos. 3/4, pp 185-200(IF:0.44).
  32. Unune, D, Mali, H S, 2014, “Current Status and Applications of Hybrid Micro-Machining Processes: A Review” Proceeding of the Institution of Mechanical Engineers, Part B: International Journal of Engineering Manufacture, ISSN: 09544054, DOI: 10.1177/0954405414546141, 229, No. 10, pp. 1681-1693.(SCI)
  33. Mali, H S and Manna, A, 2014, “An experimental investigation during finishing of particulate reinforced Al/10 wt% SiCp-MMC on developed AFF setup” Int. J. Manufacturing Technology and Management, ISSN: 1368-2148., ISSN online: 1741-5195, Vol. 28, No. 1/2/3,pp.114-131. (Scopus)
  34. Dixit, A; Mishra RK, and Mali, HS; 2014 “Compression modeling of plain weave textile fabric using finite elements ” Materialwissenschaft und Werkstofftechnik, ISSN:0933-5137, Vol. 45, Issue-7, pp 600-610. DOI:10.1002/mawe.201400273, (SCI)
  35. Dixit, Anurag and Mali, Harlal Singh, 2013 “Modeling techniques for predicting the mechanical properties of woven fabric textile composites: a review” International Journal Mechanics of Composite Materials, ISSN 1573-8922, 49, No.1, pp 1-28.. (SCI)
  36. Mali, Harlal Singh and Manna, Alakesh, 2012 “ANN based Simulation of surface generated during AFF of Al/SiCP-MMC” International Journal of Advanced Manufacturing Technology, Vol.-61, pp-1263-1268. (SCI)
  37. Mali , Harlal Singh and Manna , Alakesh,, 2011 “Experimental investigation during finishing of Al/Sic-MMC’s by Abrasive Flow Machining (AFM) process., International Journal of Advanced Materials Research, ISSN: 1662-8985 264-265, pp 1130-1136.(Scopus)
  38. Mali , Harlal Singh and Manna, Alakesh, 2010 “Optimum selection of abrasive flow machining conditions during fine finishing of Al/15 wt.% Sic-MMC using Taguchi method” International Journal of Advanced Manufacturing Technology, Vol. 50, Issue-9, pp. 1013-1024. (SCI)
  39. Mali, Harlal Singh and Manna, Alakesh, 2010 “Parametric Optimization of AFM process during finishing of Al/5wt%SiC-MMC cylindrical surface.” International Journal of Machining and Forming Technologies, Vol. 3 Issue 3-4, 269-284. .( Non-SCI/Scopus)
  40. Mali, H S and Manna, A, 2009, “Current status and application of abrasive flow finishing processes: a review” Proceeding of the Institution of Mechanical Engineers, Part B: International Journal of Engineering Manufacture, eISSN: 20412975,ISSN: 09544054 , 223, pp.  809-820.(SCI)
  41. Mali, Harlal Singh and Manna, Alakesh, 2009, “Optimization of AFM Parameters during Finishing of Al-6063 Alloy Cylindrical Surface” International Journal of Machining and Forming Technologies, 2009, Vol.1 Issue 3/4, pp. 237-248. .( Non-SCI/Scopus)

National Journals

 

  1. Pathri, BP; Chaudhary, R; Mali, H.S.; Nagar, R.; 2017, “Abrasion wear characterization of natural stones subjected to foot traffic and correlation between abrasion and mechanical properties, i-manager’s Journal of Material science, ISSN: 2347-2235, Vol.4, Issue.4, pp.  10-17(Non-SCI/Scopus).
  2. Dixit, A; Mali, HS; and Mishra RK, 2014 “A Micromechanical Unit Cell Model of 2 × 2 Twill Woven Fabric Textile Composite for Multi Scale” Journal of the Institution of Engineers (India): Series E., Vol. 95, No. 1, pp,1-9 ISSN-Print: 2250-2483, Online: 2250-2491.
  3. Mali, H S and Manna, A, 2011, “Micro finishing of Al/15 wt% SiCp-MMC on developed AFM setup” Chemical Engineering Journal of The Institution of Engineers (India), Vol. 91, pp. 3-12.( Non-SCI/Scopus)
  4. Mali, H. Singh and Manna, A., 2009, “An Experimental Investigation on Abrasive Flow Finishing of Al-6063 alloy cylindrical surface” Production Engineering J. of the Institution of Engineers (India), 90, pp.1-5.
  5. Mali, H. S. and Pabla, B S, 2006 “Computer Aided Tolerance Analysis of One Way Clutch Assembly by Vector Loop Method”, Production Engineering Journal of ‘The Institution of Engineers’ (India), Vol 86, pp. 64- 69. .( Non-SCI/Scopus)