Conference Publications

International Conferences

  1. Mali, Harlal Singh; Baghel, Rupali;  Unune, Deepak Rajendra; 2017 “Experimental Investigation on Hybrid Micro-Electro Discharge Machining of Inconal 718 and Ceramics Materials,” In Proceedings of International Academic Multi Disciplinary Conference (IAMDC) conducted by WAIRCO at Mauritius from 17-18 Feb 2017.
  2. Wheatley, Benjamin B.; Fischenich, Kristine M.; Abrams, Lisa M.; Sorby, Sheryl A.; Mali, Harlal Singh; Jain, Anil K; Donahue; Tammy L. Haut; 2017, ‘Improvement of an International Research Experience: Year Two” In Proceedings of ASEE Annual Conference & Exposition held at Columbus, Ohio, USA from 25-28 June 2017.
  3. Sambharia, Jaikishan; Mali, Harlal Singh; 2017 “Fine Finishing of Glass Mold Surfaces using Low Cost Unidirectional Abrasive Flow Machine”  In Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10) held at IIT Madras, from 07-09 Dec 2017. 
  4. Unune, Deepak; Mali, Harlal Singh; 2017 “Effects Of Micro-eletro Discharge Milling Parameters On Micro-features Dimensional Accuracy”  In Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10) held at IIT Madras, from 07-09 Dec 2017. 
  5. HS Mali, N Kumar, 2016, “Investigating Feasibility of Waste Vegetable Oil for Sustainable EDM“, 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), 405-410, ISBN: 978-93-86256-27-0
  6. DR Unune, HS Mali, 2016, “Experimental Investigations on Low Frequency Workpiece Vibration in Micro Electro Discharge Drilling of Inconel 718“, 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), ISBN: 978-93-86256-27-0 
  7. DR Unune, HS Mali, 2016, “Optimization of Multi-Performance Characteristics in Abrasive Mixed Electro-Discharge Diamond Cut-off Grinding of Inconel 718 using Taguchi Grey Relational Analysis“, All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), 1408-1412,  ISBN: 978-93-86256-27-0
  8. B Prajwal, P Chauhan, HS Mali, R Nagar, 2016, “Sustainability Study and Energy Audit of Marble Industry of Rajasthan“, All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), 594-599,  ISBN: 978-93-86256-27-0
  9. JK Sambharia, HS Mali, 2016, “Performance Study of Developed Alternative Polymer Abrasive Gel and Commercial Media in Abrasive Flow Machining“,  All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), 356-360,  ISBN: 978-93-86256-27-0
  10. R Baghel, HS Mali, SK Biswas, 2016, “Parameter Optimization of Diamond Grinding Assisted EDM of TiN-Al2O3 Ceramics using Taguchi Method“, All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), 272-275,  ISBN: 978-93-86256-27-0
  11. R Baghel, HS Mali, SK Biswas, 2016, “Study of Vibration Assisted Micro Electro-Discharge Milling of Titanium Nitride-Aluminium Oxide Composite“,  All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), 276-279,  ISBN: 978-93-86256-27-0
  12. Bhargav Prajwal, Jaikishan Sanbharia, Harlal Singh Mali, Ravindra Nagar, “Mechanical, Thermal and Rheological Characterization of marble waste with Different Coolants”, in Material Today proceedings for International conference on Processing of Materials, Minerals and Energy, at PACE institute, India, 29-30 July 2016.
  13. Bhargav Prajwal, Harlal Singh Mali, Rohit, Ankit, Sandeep, Manish, 2015, “Study & analysis of various marble cutters used in stone and marble Industry of Rajasthan”, in Proceedings of the International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING (COPEN-9), 10-12 Dec 2015, Department of Mechanical Engineering, IIT Bombay, India, Vo. 1,
  14. Jaikishan Sambharia, Harlal S. Mali, Jasa Ram, 2015, “Rheological Investigation and Comparative Study on Synthesized Low Cost Consumables for Abrasive Flow Finishing Processes”, in Proceedings of the International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING (COPEN-9), 10-12 Dec 2015, Department of Mechanical Engineering, IIT Bombay, India, Vo. 1,
  15. Harlal Singh Mali, Deepak Rajendra Unune, Vijay Pratap Singh, “Parametric Analysis of Powder Mixed Electro Discharge Diamond Grinding of AISI D3 Die Steel”, in Proceedings of the International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING (COPEN-9), 10-12 Dec 2015, Department of Mechanical Engineering, IIT Bombay, India, Vo. 1,
  16. Deepak Rajendra Unune, Harlal Singh Mali, “Performance Investigations of Different Electrode Materials in Micro-EDM Drilling of Inconel-718”, in Proceedings of the International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING (COPEN-9), 10-12 Dec 2015, Department of Mechanical Engineering, IIT Bombay, India, Vo. 1,
  17. Mali, H S, Unune, D R, Tiwari, S, 2014, “Modelling and Prediction of Material Removal Rate In Electrical Discharge Diamond Surface Grinding Process Of Inconel-718”, Accepted in proceedings of 5th International and 26th All India Manufacturing Technology, Design and Research Conference, (AIMTDR 2014) 12-13 Dec, 2014, IIT, Guwahati.
  18. Mali, H S, Jaikishan, 2014,“Developing Alternative Polymer Abrasive Gels For Abrasive Flow Finishing Process”, Acceptedin proceedings of 5th International and 26th All India Manufacturing Technology, Design and Research Conference, (AIMTDR 2014) 12-13 Dec, 2014, IIT, Guwahati.
  19. K. Misra, Anurag Dixit and Harlal Singh Mali, 2014 “Finite Element (FE) Shear Modeling of Woven Fabric Textile Composite”, in Procedia Materials Science of Elsevier for 3rdInternational Conference on Materials Processing and Characterization (ICMPC), GRIET, Hyderabad.
  20. Anurag Dixit, R.K. Misra, Harlal Singh Mali, 2014 “Finite element compression modeling of 2×2 twill woven fabric textile composite”, in Procedia Materials Science of Elsevier for 3rd International Conference on Materials Processing and Characterization (ICMPC), GRIET,
  21. Mayank Nirbhay, Anurag Dixit, R.K. Misra, Harlal Singh Mali,2014 “Tensile test simulation of CFRP test specimen using finite elements” in Procedia Materials Science, of Elsevier for International Conference on Advances in Manufacturing and Materials Engineering, (AMME), NIT Surathkal.
  22. Mali, H S and Manna, A, 2013, “Simulation of Material Removal during Loose Abrasive Finishing of Al/SiCp-MMC Surfaces” in Proceedings of the International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING (COPEN-8), 13-15 Dec 2013, Department of Mechanical Engineering, National Institute of Technology Calicut, India, Vo. 1, , pp.457-462
  23. Anurag Dixit, Harlal Singh Mali and R.K. Mishra, 2013, “Unit cell model of plain weave textile composite for multi-scale analysis”, in Procedia Engineering of Elsevier for Malaysian International Tribology Conference , Kotakinabalu, Sabah, Malaysia.
  24. Mali , Harlal Singh and Manna, Alakesh, 2012 “An Investigation on Nano-Finishing of Al/10 wt% SiCp-MMC by developed Abrasive Flow Finishing setup” in proceedings of 4th International and 25th All India Manufacturing Technology, Design and Research Conference, (AIMTDR 2012) 14-16 Dec, 2012, Jadhavpur University, Kolkata.
  25. Mali, HS and Manna A, 2010 “ANN based Simulation of surface generated during AFF of Al/SiCP-MMC” in proceedings of 3rd International and 24th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, Andhra University, Visakhapatnam.
  26. Mali, H S and Manna A, 2009 “Parametric Study for Surface Roughness during Abrasive Flow Finishing of AL/SiCp-MMC”. In: Proceedings of the Sixth International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 6), PSG College of Technology & AMRITA Institute, Coimbatore.
  27. Mali, Harlal Singh and Alakesh Manna, 2009, “Experimental Investigation during Finishing of Al/SiCp-MMC’s by Abrasive Flow Machining Process” In proceedings of The International Conference on Advances in Materials and Processing Technologies, (AMPT), International Islamic University, Kualalumpur, Malaysia.
  28. Mantri, A., Yadav, AK, Mali, HS, 2009, “IUCEE success stories in Chandigarh and Haryana in the Northern Region of India” In: Proceedings of the ASEE Global Colloquium for Engineering Education, Budapest, Hungary.
  29. Mali, H S and Manna A, 2007, “Effects of Cutting Parameters of AFF During Generation of Finished Cylindrical Surface” In: Proceedings of the International Conference on Emerging Trends in Manufacturing (ICETM), Continental  Institute for International Studies, Fatehgarh Sahib, Punjab.
  30. Mali, H S and Pabla, B S, 2007, “Tolerance Analysis: a CAD & CAM Integration Tool” In: Proceedings of the International Conference on Emerging Trends in Manufacturing (ICETM), Continental  Institute for International Studies, Fatehgarh Sahib, Punjab.

National Conferences

  1. Jaikishan, Mali, HS, 2015, “Abrasive Flow Finishing Process -A sustainability Study”. In: Proceedings of the National Conference on Sustainable Manufacturing, 02-03 Jan, 2015, Department of Management Studies, MNIT Jaipur.
  2. Mali, HS, Rana P., 2013, “Improvements in Design of Tooling of Trim Dies in Abrasive Flow Machining”. In: Proceedings of the 28th National Convention of Production Engineers and National Seminar on “Advancements in  Production  and  Operations  Management” 04-05 May, 2013, Mechanical Engineering Department, MNIT Jaipur.
  3. Mali, HS and Rasid A., Rai D., Poonia KS, Choudhary Y., 2013, “Effect of Cutting Parameters on MRR and Surface Roughness in Turning of AISI 316 Austenitic Stainless Steel”. In: Proceedings of the 28th National Convention of Production Engineers and National Seminar on “Advancements in  Production  and  Operations  Management” 04-05 May, 2013, Mechanical Engineering Department, MNIT Jaipur.
  4. Mali, HS and Gopal R., 2013, “Design & Manufacturing of NiTi Based Actuators to be used in Automobile Security System: A Review and Possibility”. In: Proceedings of the 28th National Convention of Production Engineers and National Seminar on “Advancements in  Production  and  Operations  Management” 04-05 May, 2013, Mechanical Engineering Department, MNIT Jaipur.
  5. Mali, H S and Kumar, Rajesh, 2007, “Challenges & Opportunities in the Technological journey from MEMS to NEMS”, In: Proceedings of the National Conference on Recent Trends & developments in Applied Sciences in Engineering & Technology (RTDASET), Department of Applied Sciences, Chitkara Institute of Engineering & Technology, Rajpura, Punjab.
  6. Mali, HS and Manna A, 2007, “Nano-Abrasive Flow Finishing: A review and idea” In: Proceedings of the National Conference on Advancement in Materials and Manufacturing Technology (AMMT), Mechanical Engineering Department, Punjab Engineering College (deemed University), Chandigarh.
  7. Mali, HS and Manna A, 2007, “A Preliminary Study to Optimize the Surface Quality during Abrasive Flow Machining” In: Proceedings of the National Conference on Advancement in Materials and Manufacturing Technology (AMMT), Mechanical Engineering Department, Punjab Engineering College (deemed University), Chandigarh.
  8. Mali, H S and Suri, NM, 2007, “Green Welding Processes for Sustainable Development” , In: Proceedings of the National Conference on Trends in Mechanical Engineering (TME), Mechanical Engineering department, Chitkara Institute of Engineering & Technology, Rajpura, Punjab.
  9. Mali, H S and Pabla, B S, 2006 “Integrating CAD and CAM through Computer Aided Tolerance Analysis”, In: Proceedings of the National Conference in Advances in CAD/CAM Technology, NITTTR, Sector-26, Chandigarh.
  10. Singh, A K and Mali, H S, 2006, “Implementation of Non-Destructive Evaluation Techniques for Inspection of Helicopter Tail Rotor Blades”, In: Proceedings of the National Conference on Recent Trends & developments in Applied Sciences in Engineering & Technology (RTDASET), Department of Applied Sciences, Chitkara Institute of Engineering & Technology, Rajpura, Punjab.
  11. Mali, H S and Pabla, B S, 2005 “Tolerance Analysis of a Mechanical Assembly: A Computerized Approach”, In: Proceedings of the National Conference in Advances in Manufacturing Technology, NITTTR, Sector-26, Chandigarh.